Table of Contents
Advertisement
®
ABB Welcome
4
Operation
4.1
Control elements
Fig. 1:
Overview of control buttons
No.
Functions
Bus in
1
2
Bus out
CVBS out
3
Switch on camera power supply
4
For details, please see Chapter 4.4 With and without permanent power
supply.
Working mode
5
There are four modes for the camera interface. For details, please see
Chapter 4.3 Operation mode.
6
Set the address of the associated devices
7
Set the address of the camera interface
Operating status notification LED
8
-Green: ready for operation
-Orange: in setting mode
-Red: fault
Dip switch to switch on/off the video channel
9
Program button to enter the programming mode
10
4 video (supports CVBS signal input)
11
— 4 —
Advertisement
Table of Contents
