Mode=4, Programming Mode - ABB 83327-500 Manual

®
ABB Welcome
4.2.4

Mode=4, programming mode

Fig. 5:
mode=4, programming mode
Rotary Value Note
Mode 4 Camera interface works in programming mode.
Camera interface mode, camera interface address and associated device
Addr null
address can all be programmed with software.
In mode=4, besides camera interface and guard unit, camera interface can
also be associated with video indoor station.
ID null
If camera interface is associated with video indoor station, ID should start
from 1 to 9 sequently.
For details, see Chapter 4.3 Programming mode.
Dip Switch 1-4 Turn to ON when a camera is connected.
Capacity
Each camera interface supports four analog cameras. Each camera can be associated with
different devices (i.e., outdoor station, guard unit, video indoor station).
A total of 36 cameras can be associated with each video indoor station. Each camera can be
associated with 250 indoor stations.
— 8 —