2
Technology > Fixing > Controls > Down sequence control
●
Related Error Code
E000: Fixing Assembly low temperature error
E001: Fixing Assembly high temperature error
E002: Fixing Assembly temperature rise error
E003: Fixing Assembly temperature decrease error
E004: Fixing Power Supply error
CAUTION:
When any of the above Error Codes, E000 to E0004, is displayed, the error code
display will not be cleared even though the Main Power Switch is turned OFF. In
such a case, cancel the error by the following service mode and turn OFF and then
ON the power.
COPIER>FUNCTION>CLEAR>ERR:Clear of error code
●
Related Service Mode
Selection of fixing improvement mode
COPIER> OPTION> IMG-FX> FSPD-S1
Setting of paper wrinkle prevention mode
COPIER> OPTION> IMG-FIX> FX-WNKL
2
Technology > Fixing > Controls > Down sequence control
■
Down sequence control
●
Overview
In the case of great difference between the target temperature and the detected temperature
at the start of printing or during printing, productivity is dropped to prevent fixing failure or
image failure.
●
Execution timing
•
During printing
•
At the start of printing and when the paper type is switched
2-112
2-112