Input/Output Signals Of Connectors - Sony MVS-8000X-C Installation Manual

1-7. Input/Output Signals of Connectors

The input/output signals of the connectors at the rear panel
are as follows.
GPI 1, 2 * : (D-sub 25-pin, Female)
* GPI 2 is not supported
INPUT x 8, TTL
OUTPUT x 4, relay contacts 30 V/0.1 A
(resistive load)
OUTPUT x 4, open collector 30 V rated voltage
13
25
(External view)
Pin No. Signal Name Function
1 GND Ground
2 GND Ground
3 GPI IN 2 General-purpose input
4 GPI IN 4
5 GPI IN 6
6 GPI IN 8
7 GPI OUT 1B General-purpose relay
output (B)
8 GPI OUT 2B
9 GPI OUT 3B
10 GPI OUT 4B
11 GPI OUT 6 General-purpose open collector
output
12 GPI OUT 8
13 GPI OUT Ground for open collector output
COM
14 GND Ground
15 GPI IN 1 General-purpose input
16 GPI IN 3
17 GPI IN 5
18 GPI IN 7
19 GPI OUT 1A General-purpose relay output (A)
20 GPI OUT 2A
21 GPI OUT 3A
22 GPI OUT 4A
23 GPI OUT 5 General-purpose open collector
output
24 GPI OUT 7
25 GPI OUT Ground for open collector output
COM
MVS-8000X/7000X
1
14
(*1)
(*2)
(*1)
(*2)
n
A and B of the same number constitute a pair of relay
contacts.
(*1) <Relay>
(*2) <Open collector output>
GPI OUT x B
GPI OUT x A
x : 1-4
+V
GPI OUT 5-8
GPI OUT COM
1-17