Input And Output Signals Of Connectors; Dvs-7150; Bkds - Sony BKDS-7017 Installation Manual

1-4. Input and Output Signals of
Connectors
The input and output signals of the connectors on the rear
panel are specified in the following table. And refer to the
following illustration for the pin positions of the connec-
tors.

1-4-1. DVS-7150

[D-SUB 25 PIN • FEMALE]
13
25
EXT VIEW
[D-SUB 9 PIN • FEMALE]
5
9
EXT VIEW
m
(*1) <CONTROLLER> : Controlling device
(*2) <DEVICE> : Controlled device
PANEL 1 : RS-422A (D-sub 9-pin.Female)
<DEVICE> from Control panel BKDS-7017
(*2)
Pin No. Signal Name
1 GND
2 TX-A
3 RX-B
4 GND
5 FIELD (+)
6 GND
7 TX-B
8 RX-A
9 FIELD (_)
DVS-7150E IM
1
14
1
6
Function
Frame ground
Transmitted data (_)
Received data (+)
Common ground
Field signal output (+)
Common ground
Transmitted data (+)
Received data (_)
Field signal output (_)

1-4. Input and Output Signals of Connectors

GPI
TERMINAL
25 9
PANEL2 /REMOTE3 EDITOR-B /REMOTE2
9 9
Rear panel
PANEL 2/REMOTE 3 : RS-422A (D-sub 9-pin.Female)
<DEVICE> from Control panel
(*2)
Pin No. Signal Name
1 GND
2 TX-A
3 RX-B
4 GND
5 VD-B
6 GND
7 TX-B
8 RX-A
9 VD-A
(*3) : Control Panel BKDS-2010 etc. (PANEL 2)
Keyer Remote Panel BKDS-7060 etc. (REMOTE 3)
PANEL1
9
DME1
9
SERIAL TALLY DME2
9 9
EDITOR-A /REMOTE1 MATRIX /REMOTE4
9 9
(*3)
Function
Frame ground
Transmitted data (_)
Received data (+)
Common ground
Transmited VD signal (+)
Common ground
Transmitted data (+)
Received data (_)
Transmited VD signal (_)
1-3