Huawei IPC6061-FP Quick Start Manual page 19

IPC6061-FP
Quick Start Guide
Figure 4-9 Waterproof connector installation
Step 1 Keep the convex groove outward and install the rubber ring into the network port, keep the
smaller hole of the rubber ring outward and install the fixing rubber ring into the main body
of the waterproof connector.
Step 2 Pull the network cable without crystal head through main body of waterproof connector,
fixing rubber ring and waterproof locking cover, make the crystal head of network cable, and
then insert it into the network cable.
Step 3 Put the main body of waterproof connector on the network port and rotate it clockwise to lock
the network port and waterproof connector firmly.
Step 4 Put the waterproof locking cover on the main body of waterproof connector and rotate it
clockwise to lock the waterproof connector and waterproof locking cover firmly.
----End
Issue 01 (2019-02-22) Copyright © Huawei Technologies Co., Ltd.
4 Installation
16