Login Web Interface - Huawei IPC6061-FP Quick Start Manual

IPC6061-FP
Quick Start Guide
Step 6 Click Save to complete modification of device IP address.
----End

5.3 Login Web Interface

Step 1 Open Internet Explorer, enter the modified camera IP address in the address box, and press
Enter.
Step 2 Please operate according to the interface prompt if the interface displays guide of Online
Upgrade.
Step 3 Enter the user name and password and click Login.
Step 4 For the first login, click Please click here to download and installthe plug-in., Install
controls as prompted.
Step 5 The main interface will be shown in after control installation is completed.
Figure 5-4 Web Interface
----End
Issue 01 (2019-02-22)
NOTE
l HTTP is an insecure protocol which may incur security risks. Therefore, you need to enable the
HTTPS protocol to enhance system security. For details, see HTTPS in the User Manual.
l After the HTTPS protocol is enabled, you are advised to access the camera web page by entering
https://camera IP address in the address box of your web browser.
Copyright © Huawei Technologies Co., Ltd.
5 Network Configuration
20