Setup; Introduction; Invoking Setup - Mitsubishi Electric apricot XEN-LS II Using Setup And Installing Add-Ons

SETUP

Introduction

The Apricot XEN-LS II motherboard is fitted with a small
area of memory which is used to store information about
the configuration of the computer. The computer's
configuration is modified using a SETUP utility provided in
Read Only Memory (ROM) on the motherboard.
A rechargeable battery on the XEN-LS II motherboard
maintains the configuration memory when the computer is
switched off.

Invoking SETUP

Each time the XEN-LS II is switched on, or rebooted, it
runs through a self test procedure. During this period the
SETUP utility can be invoked by pressing the + key
ALT S
combination.
The XEN-LS II can boot in two ways, it can use a graphical
boot screen, or a conventional text based boot screen.
During graphical boot a Setup button is displayed, SETUP
can only be invoked while the button is not greyed out.
During text boot a prompt appears on the screen, while the
prompt is visible SETUP can be invoked.
There may be a delay of a few seconds, while the self test
procedure is completed, before the SETUP screen
appears.
3