9 Remove the four screws from bridge adapter VME connectors, as shown
in Figure 2-8.
10 Using a small screwdriver or razor, remove the copper EMI gasket on the
front bezel of the bridge adapter, as shown in Figure 2-8.
Bridge Adapter
Front Bezel
EMI gasket
Figure 2-8
Removing Bridge Adapter Screws and EMI Gasket
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
PMC Bridge Adapter and Expansion Adapter
Bridge Adapter
VME Connectors
Installing Accessories
Screws (4)
2-17