Table of Contents
Advertisement
Setting the water intake time
for the ice cube maker
The size of the ice cubes produced
depends on the water pressure present
and the water intake time which has
been set for the ice cube maker.
If the ice cube maker is only producing
small ice cubes the water pressure is
low. In order to produce larger ice
cubes, the water intake time for the ice
cube maker needs to be prolonged.
^ Switch the ice cube maker on.
^ Touch and leave your finger on the X
sensor.
^ At the same time, briefly touch the
On/Off sensor (without letting go of
the X sensor).
^ Leave your finger on the X sensor for
another 5 seconds until c appears in
the display.
^ Touch the X sensor repeatedly until
e appears in the display.
^ Touch the On/Off sensor to confirm.
^ Touch the X sensor repeatedly until
e 2 appears in the display.
^ Touch the On/Off sensor again to
confirm.
Making ice cubes
^ The length of the water intake time for
the ice cube maker can now be
adjusted by touching the X sensor:
E 1: Shortest water intake time,
E 8: Longest water intake time,
E – : Return to menu.
The old setting lights up, and your
newly selected setting flashes.
^ Touch the On/Off sensor to confirm
the new setting.
^ Touch the X sensor repeatedly until
e - appears in the display.
^ Touch the On/Off sensor to confirm.
^ Touch the X sensor repeatedly until
c appears in the display.
^ Touch the On/Off sensor.
You have now left settings mode.
43
Advertisement
Table of Contents
