Toro 23522 Operator's Manual page 31

Problem
The cutting height is uneven.
The blade does not rotate.
The brush cutter does not move when the
traction drive is engaged.
The cutting performance is poor.
Possible Cause
1. The blade(s) is not sharp.
2. The cutting blade is bent.
3. The underside of the mower is dirty.
4. A blade spindle is bent.
1. The mower belt is off the pulley.
2. The blade-control clutch is faulty.
3. The mower belt is worn, loose, or
broken.
1. The transmission belt is off the pulleys.
2. The transmission belt is worn, loose,
or broken.
3. The transmission bypass is engaged.
4. The parking brake is engaged.
5. The shaft key that drives the wheel
is missing or sheared at one or both
wheels.
6. The transmission is faulty.
1. The forward traction speed is too fast.
2. The blade is dull.
3. The underside of the mower deck is
clogged with debris.
31
Corrective Action
1. Sharpen the blade(s).
2. Install a new cutting blade.
3. Clean the underside of the mower.
4. Contact an Authorized Service Dealer.
1. Install the mower belt.
2. Contact an Authorized Service Dealer.
3. Install a new mower belt.
1. Install the transmission belt.
2. Replace the transmission belt.
3. Disengage the transmission bypass.
4. Disengage the parking brake.
5. Replace the shaft key.
6. Contact your Authorized Service
Dealer.
1. Reduce the forward speed.
2. Sharpen or replace the blade.
3. Clean the debris from beneath the
deck.