Product Overview; Controls - Toro Groundsmaster 7210 Series Operator's Manual

Product Overview

3
2
1
1. Parking brake lever
2. Fuel cap (both sides)
3. Roll bar
3
4
1. Ignition switch
2. Throttle lever

Controls

Become familiar with all the controls before you start
the engine and operate the machine
Figure 5).
4
5
6
4
G020877
Figure 4
4. Motion control lever
5. Seat
6. Seat belt
1
2
Figure 5
3. Power take off (PTO)
Switch
4. InfoCenter
(Figure 4
Motion-Control Levers
The motion-control levers control the forward and
rearward motions as well as the turning of the
machine. Refer to
Parking-Brake Lever
Whenever you shut off the engine, engage the parking
brake to prevent accidental movement of the machine.
To engage the parking brake, pull the parking-brake
lever rearward and up
parking brake, push the parking-brake lever forward
and down.
g020877
1. Parking-brake lever
Ignition Switch
The ignition switch has 3 positions: O
and S .
TART
Throttle Lever
g022099
The throttle lever controls the speed of the engine,
g022099
the speed of the blades, and, in conjunction with
motion-control levers, the ground speed of the
machine. Moving the throttle lever forward toward the
F position increases the engine speed. Moving
AST
it rearward toward the S
engine speed. Always run the machine with the
throttle in the F
Power-Takeoff (PTO) Switch
and
The power-takeoff (PTO) switch starts and stops the
mower blades.
11
Driving the Machine (page
(Figure 6). To release the
Figure 6
FF
position decreases the
LOW
position when cutting grass.
AST
25).
G020866
g020866
, O /P ,
N REHEAT