Input And Output Signals Of Connectors; Ixs-6700, Ixs-6600 - Sony IXS-6700-C Installation Manual

1-8. Input and Output Signals of
Connectors
The input and output signals of the connectors at the rear
panel are as follows.

1-8-1. IXS-6700, IXS-6600

(*1)
REMOTE2 A/B :RS-422A (D-sub 9-pin, Female)
(*2)
REMOTE2 :
5
9
_ EXT VIEW _
Pin No. Signal name Input/Output
1 FG _
2 TX (_) O
3 RX (+) I
4 GND _
5 _ _
6 GND _
7 TX (+) O
8 RX (_) I
9 _ _
The Frame ground pin and the Common ground pin are
connected each other internally in the IXS machine.
*1 : IXS-6700
*2 : IXS-6600
REMOTE3 : RS-232C (D-sub 9-pin, Male)
1
6
_ EXT VIEW _
Pin No. Signal name Input/Output
1 _ _
2 RX I
3 TX O
4 DTR O
5 GND _
6 DSR I
7 RTS O
8 CTS I
_ _
9
1-14
1
6
Function
Frame ground
Transmitted data (_)
Received data (+)
Common ground
No connection
Common ground
Transmitted data (+)
Received data (_)
No connection
5
9
Function
No connection
Received data
Transmitted data
Data terminal ready
Signal ground
Date set ready
Request to send
Clear to send
No connection
ALARM (*1)
: D-sub Mini 15-pin, Female
5
10
15
_ EXT VIEW _
Pin No. Signal name Input/Output
1 ALARM-3 O
2 ALARM-1 O
3 ALARM-4 O
4 GND _
5 ALARM-5 O
6 to 8 GND _
9 ALARM-6 O
10 GND _
11 GND _
12 ALARM-2 O
13 to 15 GND _
*1 : IXS-6700
n
ALARM output electrical specifications
Open-collector output
Terminal applicable voltage: 0 to 20 V
Terminal draw-out current:
The maximum draw-out current is 50 mA when the
output transistor is in the saturated state (output
terminal voltage of 1 V or less)
In the un-saturated state, [output terminal voltage]
x [draw-out current] < 50 mA.
NETWORK A, B:
100BASE-TX (RJ-45 8-pin Modular jack)
1
_ EXT VIEW _
Pin No. Signal name Input/Output
1 TDB O
2 TDA O
3 RDB I
4 BI_D3+ _
5 BI_D3_ _
6 RDA I
7 BI_D4+ _
8 BI_D4_ _
*3 : This signal line is not used in this system. It is connected to the
termination circuit inside the system.
1
6
11
Function
Alarm drive-3
Alarm drive-1
Alarm drive-4
Ground
Alarm drive-5
Ground
Alarm drive-6
Ground
Ground
Alarm drive-2
Ground
8
Function
Transmitted data B
Transmitted data A
Received data B
(*3)
(*3)
Received data A
(*3)
(*3)
IXS-6600/6700