Panasonic 3DO FZ-1 Service Manual page 11

FZ-1
• Tray
Figure 12
Tray
Figure 13
/ , ~
.......
/ CD
Hook"
r,~j
,,:Jf' /
---
-
Figure 14
Figure 15
2-7
(1) Remove two screws <A> (3 x 6 mm),
then remove the Front Beam as shown
in Figure 12.
(2)
Push the Emergency Button by using
a thin screwdriver as shown in
Figure 13.
(3) Draw out the Tray to limit.
(4) Push up the hook from the reverse side
as shown in the arrow
<D
of Figure 14.
(5) Pull out the Tray as shown in the
arrow <2l of Figure 14.
caution: Don't touch the Cleaning Brush
in Figure 15.
• Tray Reassembly
Figure 16
Figure 17
• Mechanism
~--
<il>
\ I
' Hooks__,Z.,,-
.._ - I
Holder Beam
Figure 18
Figure 19
C[}.ROM Drive Cover
2-8
(1) The Tray can be fitted into the
mechanism unit as shown in Figure 16.
(2) Gradually insert the Tray.
(1) Remove two screws <B> (3 x 6 mm),
then remove the Rear Beam as shown
in Figure 18.
(2) Remove the screw <C> (2.6 x 8 mm) in
Figure 18.
(3) Remove the Holder Beam while
pushing three Hooks as shown in
Figure 18.
(4) Remove five screws <D> (2.6 x 8 mm),
then remove the CD-ROM Drive Unit
cover.
FZ-1