Panasonic 3DO FZ-1 Service Manual page 13

FZ-1
FlatCable ,,- - '-
~ N 8 \\
Figure 28
Figure 29
Figure 30
CNS
Figure 31
\ rt?
I
/
' - -
---
r - - - --)
I
_fp
I
I
,::jfl11
I
I --1J.lL_ I
I I
I
v
. . I
==91l:
I
\.
_____
.)
2-11
(9) Connect the flat cable to CN 6 as
shown in Figure 28.
(10) Fit the front end of the Traverse Deck
as shown in Figure 29.
(11) Lock the rear end of the Traverse
Deck as shown in Figure 30.
(12) Turn the CD·ROM Drive Unit.
(13) Connect the connector (CN 5) as
shown in Figure 31.
Replacing the Mechanism Base parts . .
[ Perform the following procedures in removed the Traverse Deck, as shown
in
Figure 24.]
• Disassembling the Load Gear ass'y and Slide Lever
Figure 32
Cut portion of !he 0-ring
Figure 33
Figure 34
2-12
(1) Remove the Loading Belt as shown in
Figure 32.
(2) Remove the 0-ring (open the cut
portion of it}, and lift the pulley to
remove.
(Replace the O-ring, if it is damaged.)
(3) While pressing the knob in direction
arrow A, as shown in Figure 34, move
the Slide Lever in direction arrow B
until to stop.
FZ-1