Advertisement
3-1-3. Maintenance Menu
The Maintenance menu is used for encoder output level and other adjustments items necessary for
camera's maintenance. The Maintenance menu is not normally accessible. To display this menu, switch
setting of the AT-126 board is required.
To activate the Maintenance menu, first display the TOP menu.
(Boxed items under "Settings" indicate the factory setting.)
Page
Ver.
Item
VBS
SYNC Level
Y Level
Burst Level
Chroma Level
Q/V Level
Setup Level
BF Phase
SC-H Phase
V Blanking
White Shading
V Saw R/G/B
V Para R/G/B
H Saw R/G/B
H Para R/G/B
White R/G/B
V MOD R/G/B/M _99 to 99 ([XX])
V MOD
Auto White
Clear
j)
When the master modulation shading is adjusted, the V. Saw component for the R and B V-modulation shadings of the prism is
simultaneously compensated.
BKP-5090
Settings
Contents
_99 to 99 ([XX])
Adjusts the sync level of camera's encoder output signal.
_99 to 99 ([XX])
Adjusts the Y level of camera's encoder output signal.
_99 to 99 ([XX])
Adjusts the burst level of camera's encoder output signal.
_99 to 99 ([XX])
Adjusts the chroma level of camera's encoder output signal.
_99 to 99 ([XX])
Adjusts the Q (or V) level of camera's encoder output signal.
_99 to 99 ([XX])
Adjusts the sync level of camera's encoder output signal.
(This setting is valid only for NTSC.)
_99 to 99 ([XX])
Adjusts the burst phase of camera's encoder output signal.
_99 to 99 ([XX])
Adjusts the SC-H phase of camera's encoder output signal.
19, [20], 21H
Adjusts the V blanking width of camera's encoder output signal.
(This setting is valid only for NTSC.)
In connection with CCU, the width is fixed to 19H.
* For a PAL model, the width is fixed to 25H at all times.
_99 to 99 ([XX])
Adjusts the volume of V.Saw compensation for the R, G, or B white
shading.
_99 to 99 ([XX])
Adjusts the volume of V.Para compensation for the R, G, or B white shading.
_99 to 99 ([XX])
Adjusts the volume of H.Saw compensation for the R, G, or B white shading.
_99 to 99 ([XX])
Adjusts the volume of H.Para compensation for the R, G, or B white shading.
_99 to 99 ([XX])
Adjusts the R, G, or B white level.
Adjusts the volume of V.Saw compensation for the R, G, B or master
modulation shading of the lens and prism.
On, [Off]
Turns the V modulation shading on and off.
Press MENU SEL
Starts to automatically adjust the white balance.
switch to execute.
Press MENU SEL
Resets numeric settings to "0" on the White Shading page.
switch to execute.
(When you press the MENU SEL switch, the "Clear" indication flashes.
Press the MENU SEL switch again to execute; press CANCEL
button to cancel.)
3-1. Setup Menu (BVP-550 series)
3-1-3. Maintenance Menu
j)
3-11 (E)
Advertisement
