Switching A Different Source For Each Level (Breakaway) - Sony MKS-R4020 Operating Instructions Manual

1
Press the ASSIGN button.
2
Press and hold the ASSIGN button, and press the
selection button you want to set to "No Assign" for
3 seconds.
The assignment is cleared, and the selection button
lamp turns off.
The ASSIGN button is lit bright green while it is
pressed.
When the ASSIGN button is released, it returns to
being lit dim green.
Switching a Different Source for Each
Level (Breakaway)
When switching sources, a different source can be
switched for each level. This is called the breakaway
function.
When the breakaway function is used, the display of the
source/destination selection buttons and level selection
buttons is different from the basic operation. When IN001
to IN016 are assigned to selection buttons 1 to 16 in the BPS
selection method, the display changes as follows.
When the breakaway function is not used
The following is displayed when a single source is selected
for all levels.
Level Source
LEVEL 1 IN 11
LEVEL 2 IN 11
LEVEL 3 IN 11
Source, destination, and level display
Video: LEVEL 1
Source
Audio channels 1/2:
VTR
LEVEL 2
Audio channels 3/4:
LEVEL 3
When the breakaway function is used
The following is displayed when different sources are
selected for each level.
Level Source
LEVEL 1 IN 11
LEVEL 2 IN 14
LEVEL 3 IN 16
Destination
OUT 3
OUT 3
OUT 3
Video
IN 11 OUT 3
routing
switcher
Destination
VTR
IN 11 OUT 3
Audio
routing
switcher
IN 11 OUT 3
Destination
OUT 3
OUT 3
OUT 3
Breakaway function display (single-level mode)
Video: LEVEL 1
Source
VTR
Audio channels 1/2:
Audio
LEVEL 2
source
Audio channels 3/4:
LEVEL 3
Audio
source
Selection button display when the breakaway
function is used (BPS selection method)
When a single level is selected, the breakaway function is
not used, and the sources with the selected level light up
brightly in the color configured using [Display Settings] >
[Color Settings] in the web menu. When LEVEL1 is selected,
the IN11 display is lit brightly. When LEVEL3 is selected, IN16
is lit brightly.
When multiple levels are selected, the display changes
according to the [Display Settings] > [Breakaway] setting in
the web menu.
When LEVEL1, LEVEL2, and LEVEL3 are selected and
[Breakaway] is set to [Top Level], the LEVEL1 (top level
among the selected levels) source IN11 display is lit brightly
in the color specified using [Breakaway Color]. When set to
[All Level], the LEVEL1 (top level among the selected levels)
source IN11 display is lit brightly in the color specified using
[Color Settings], and the other sources IN14 and IN16 are lit
brightly in the color specified using [Breakaway Color].
Switching the source for each level
Note
A SRC,DEST/LEVEL button and SHIFT button are required.
1
Press the SHIFT button.
2
Press the SRC,DEST/LEVEL button to set level
selection mode.
The SRC,DEST/LEVEL button lights up red.
MKS-R4020
SRC,DEST/LEVEL button
Selection buttons/LEVEL buttons
SRC
LV1
DEST
LEVEL
In level selection mode, the selection button
assignments are changed.
The DEST button is assigned to selection button 1,
levels are assigned to selection buttons 6 to 13, and
the active level selection button lights up.
The Def button is assigned to selection button 34, the
Sys button is assigned to selection button 35, and the
UP and DOWN buttons are assigned to selection
buttons 16 and 36.
10
Video
routing
IN 11 OUT 3
switcher
IN 14 Audio OUT 3
routing
switcher
IN 16 OUT 3
UP button
LV2 LV3 LV4 LV5 LV6 LV7 LV8 UP
Def Sys DOWN
DOWN button
Sys button
Def button
Destination
VTR