Table of Contents
Advertisement
Configuring a child device
1
On the device to set as a child, select the [Child]
radio button under [Linkage Settings] in the web
menu, and set the IP address of the parent. In
systems with network redundancy, set Parent IP
Address 1 and 2. On systems without network
redundancy, set Parent IP Address 1.
When a child of the parent is authorized, a green ""
mark and "Authorized" are displayed. If not
authorized, a gray "" mark and "Not authorized" are
displayed.
If information sharing with the parent is enabled, a
green "" mark and "Shared" are displayed. If
information sharing is disabled, a gray "" mark and
"Not shared" are displayed.
Configuring a parent device
1
On the device to set as a parent, select the [Parent]
radio button under [Linkage Settings] in the web
menu.
2
Information for devices configured as child devices
(Name, IP Address1, IP Address2, Authorization,
Share, User, Model, Description) is displayed in the
list under [Linkage Settings] in the web menu.
Check the displayed contents, select the child
devices and click the [Authorized] button to
authorize the device.
Note
Regardless of the authorization status of the child
device, control from the parent device to the child
device is possible, but control from an unauthorized
child device is not possible.
3
Set [Salvo Table], [Available Src/Dest], [Control
Area], and [Default Controls] > [Level Settings]
(excluding [Level Mode]) on the parent device in the
web menu. Copy the settings to the child devices
using the [Copy Config] button under [Linkage
Settings] in the web menu.
Note
If there is a mismatch in the above settings on parent
and child devices, the intended operations may not be
possible.
Web Menu
Various settings of the unit are configured using the web
menu.
Note
Among the menu categories on the MKS-E1620, there are
configurable items on the [Display Settings] page
(Brightness Level only), [Network Settings] page, [Remote
Maintenance] page, [Time Settings] page, and [System]
page.
Displaying the Web Menu
Enter the IP address of the unit in a web browser on a
computer to display the web menu.
https://(IP address of unit)/
The default user name and password are given below.
• User name: admin
• Password: MKSRadmin1 (default password)
You can change the password on the [System] page in the
web menu.
The recommended web browser is Google Chrome (for
Windows).
When logging in for the first time, the password setup
dialog appears. Set a password.
You can check the default IP address by simultaneously
pressing buttons 1 and 2, then turning the power on.
In NS-BUS operation, you can view the used IP address in
the locked state. For details, see
Operation (Lock)" (page 13)
displayed at startup and when LEO is disconnected.
Screen Configuration
The following buttons are displayed at the top of the web
menu screen.
Menu: Displays a list of menu categories.
Info: Displays the system version.
Error: Displays the details for an error when an error
occurs.
Search: Searches the list of configuration items and
displays the corresponding configuration page.
Reboot: Reboots the unit. Not displayed by default. To
display the button, click the [Tools] button and select
[Enable power button].
Tools: Contains the following items.
• Refresh: Updates the web menu display with the latest
status information.
• Enable power button: Displays the [Reboot] button in
the web menu, used for rebooting the unit.
• Switch to LEO Mode: Click to restart in LEO connection
mode. Disabled when started in LEO connection mode
(MKS-R4020 only).
• Switch to NS-BUS Mode: Click to restart in NS-BUS
connection mode. Disabled when started in NS-BUS
connection mode (MKS-R4020 only).
• Switch to Hybrid Mode: Click to restart in Hybrid
connection mode. Disabled when started in Hybrid
connection mode (MKS-R4020 only).
• Download logs: Downloads the logs from the unit.
14
"Preventing Accidental
. In LEO operation, it is
Advertisement
Table of Contents
