Sony SR-R1000 Installation Manual page 20

Output Connectors
Panel Indication
5 HD SDI INPUT MONITOR A/B
6 HD SDI MULTI MONITOR
7 SD/HD SDI OUTPUT A/B
8 TIME CODE OUTPUT
9 DIGITAL AUDIO OUTPUT 1 to 16
(AES/EBU)
!/ AUDIO MONITOR OUTPUT L/R
_ PHONES
(Below SRMemory slot on the control
panel)
Remote Connectors
Panel Indication
!- REMOTE 1 to 4
!= VIDEO CONTROL
![ NETWORK 1/2
!] GPIO (25P)
!\ MAINTENANCE
1-12 (E)
Remarks
BNC x 2
75 Z ?1 %
Impedance:
Voltage: 0.8 V p-p
HD SDI (1.485Gbps) (SMPTE-292M/BTA-S004B compliant)
Dual Link HD SDI (SMPTE-372M compliant)
3G SDI (2.97Gbps) (SMPTE-424M)
BNC x 1
75 Z ?1 %
Impedance:
0.8 V p-p (with 75 Z terminating resistance)
Voltage:
HD SDI (1.485Gbps) (SMPTE-292M /BTA-S004B compliant)
BNC x 6 (MONITOR: with character superimposition)
75 Z ?1 %
Impedance:
0.8 V p-p (with 75 Z terminating resistance)
Voltage:
HD SDI (1.485Gbps) (SMPTE-292M/BTA-S004B compliant)
3G SDI (2.97Gbps) (SMPTE-424M)
BNC x 1
75 Z
Impedance:
1.2 V p-p ?3 dB
Voltage:
BNC x 8 (1 set: CH1/2, CH3/4, CH5/6, CH7/8, CH9/10, CH11/12, CH13/14, CH15/16)
75 Z ?1 %
Impedance:
1.0 ?0.1 V p-p
Voltage:
AES/EBU format, unbalanced (AES3id compliant)
XLR 3-pin x 2 (1 set: L, R)
Analog audio
+4 dBm (typical) (with 600 Z load), low impedance, balanced
JM-60 stereophone jack x 1
Analog audio
Up to _12 dBu (with 8 Z load), unbalanced
Remarks
D-SUB 9-pin x 4
RS-422 interface, remote control
D-SUB 9-pin x 1
For connection to HD digital video controller (HKDV-900)
RJ-45 8-pin x 2
1000BASE-T
D-SUB 25-pin x 1
USB type x 1
RJ-45 8-pin x 1
SR-R1000