Ring Tone Selection - Mitsubishi Electric G150 Manual

All manuals and user guides at all-guides.com

Ring Tone Selection

1. Select Alert Type from the Settings Menu and
press .
2. Select Select Tone and press
• If vibrator is turned on,Vibrator ON displays for 2
seconds, then returns to the previous menu. A tone
cannot be selected (G150 only).
• If vibrator is turned off or set to vibe & ring, a list of
8 ring tones displays.
Note: To change the vibrator setting see “Vibrator”
in this chapter.
3. Move the cursor in front of each ring tone. If the
cursor remains by a tone selection for longer than a
1/2 second, a sample of the tone will sound.
4. Select a tone. A brief confirmation displays.
Ring Tone Ramping
1. Select Alert Type from the Settings Menu and
press .
2. Select Ramping and press
• If vibrator is turned on, Vibrator ON displays for 2
seconds, then returns to the previous menu. Ring
tone ramping cannot be activated (G150 only).
• If vibrator is turned off or set to vibe & ring, select
On and press
(increase) in volume after each successive ring.
Note: To change the vibrator setting see “Vibrator”
in this chapter.
40
.
.
. The ring tones will now ramp