Table of Contents
Advertisement
HOW TO USE
12
HOW TO USE
Display
* The state of operation of the product is displayed. The one that is being used will be
displayed.
Ionizer
Ionizer is displayed when
pressing ionizer button
and the product
removes vicinal Bioaerosol
by ionizer.
Water Full display
Water Full is displayed with
sound when the water tank
is full. Water Full display
automatically disappears
when water in the water tank
goes below WATER LINE. The
product works normally even
with water Full display.
* Alarm for Full Water only
sounds the first time it is
detected.
* When Water Full is detected
without turning the power on,
Water Full is only displayed for
1 minute.
Empty display
Empty is displayed with a melody when the water
tank is empty, and the product stops operating.
Empty display automatically disappears by supplying
water and the product operates normally.
* The melody sounds twice 1 minute after detecting that
there is no water in the water tank. Empty the water
tank and supply clean tap water directly into the water
tank (refer to page 10).
* No melody sounds for no water when the product is set
for sleep mode.
Sleep mode setting display
Sleep mode and set time
is displayed when sleep
mode setting button (
pressed.
Display other than sleep
mode disappears 3 seconds
after sleep mode setting
(
).
* Refer to page 13 for the sleep
mode setting.
Current humidity state
display
Current humidity around the
product is displayed.
* High, Pleasant and Low of
current humidity are set
according to statistics by a
Korean agency and there may
be personal differences.
) is
Advertisement
Table of Contents
