Table of Contents
Advertisement
SAFETY PRECAUTIONS
4
• If you will not use the product for a prolonged period of time, disconnect the power
plug from the receptacle and fully drain water from the water tank.
This may cause fire, shock or smell.
• When operating, only supply water through the upper part of the product.
This may cause fire, shock, injury or leak.
• Never insert metallic articles such as pins, needles or foreign substances into the
outlet or the filter section.
This may cause fire or injury.
• Do not move the product while the product is operating or immediately after
turning on.
This may cause fire, shock or product failure.
• Always disconnect the power cable from the receptacle when filling the water tank.
This may cause shock or product failure.
CAUTION
• Do not use the product as a ventilation fan or oven range hood in the kitchen.
This may cause product failure.
• Do not use the product near curtains or drapes.
This may cause product failure.
• Do not use the product while using indoor fumigation insecticides.
This may cause injury.
• Use clean tap water at a temperature of 40 ˚C or lower.
This may cause deformation/discoloration.
• Do not use the product for removing toxic gases such as carbon dioxide.
This may cause product failure.
• Do not use the product in the vicinity of home appliances such as microwave ovens
or television sets that emit large quantities of electrostatic fields.
This may cause product failure.
• Do not put obstacles next to the outlet of the product.
This may cause product failure.
• Use a lint-free soft cloth for cleaning the water tank.
This may cause product failure.
• Use clean tap water at a temperature lower than 40 ˚C for cleaning the moisture
disk and water tank.
This may cause deformation/discoloration, noise or product failure.
• Do not use strong detergent such as a solvent for cleaning the product. Use a soft
lint-free cloth for cleaning.
This may cause product failure or deformation/discoloration.
• Avoid damaging the power plug by forcibly bending, twisting, pulling or heating the
plug, or inserting the plug in a tight space.
This may cause fire or shock.
• Never put inflammable substances into the product.
This may cause fire or product failures.
Advertisement
Table of Contents
