Ce Marking; Declaration Of Conformity; Note For The Machine Manufacturer; Ul/Csa Certified - Bosch Rexroth IndraControl VDP 16.1 Project Planning Manual

DOK-SUPPL*-VDP16/40/60-PR03-EN-P
Rexroth IndraControl VDP 16.1/40.1/60.1 Operator Display
4.4.2

CE Marking

Declaration of Conformity

Note for the Machine Manufacturer

4.4.3

UL/CSA Certified

Standard
EN 60 068-2-6
EN 60 068-2-27
Fig.4-5: Used standards
The electronic products described in the project planning manual comply with
the requirements and goals of the following EC guideline and with the agreed
European standards:
EMC guideline 2004/108/EC
The electronic products described in the project planning manual comply with
the requirements on the operation within the industrial environment:
Standard Title
DIN EN Electromagnetic compatibility (EMC)
61000-6-4
Volume: 6-4: Generic standards - emitted interfer‐
(VDE 0839-6-4) ence for industrial environments (IEC
61000-6-4:2006)
DIN EN Electromagnetic compatibility (EMC)
61000-6-2
Volume: 6-2: Generic standards – noise immunity
(VDE 0839-6-2) for industrial environments (IEC 61000-6-2:2005)
Fig.4-6: Electromagnetic compatibility (EMC) standards
The electronic products described in this project planning manual do not fall
under the machines listed in the EC guidelines. Therefore, explanations are not
required for the 89/392/EMC guideline and do not exist.
89/392/EMC, the EC guideline for machines, specifies the requirements on a
machine. In this guideline, a machine is defined as a combination of the com‐
ponents or mechanisms combined with each other. The described products
belong to the electrical equipment of a machine. Therefore, they are to be in‐
cluded in the declaration of conformity of the machine manufacturer.
The standard EN 60204-1 (safety of machinery, general requirements on the
electrical equipment of the machines) can be used for the electrical equipment
of the machines.
NOTICE
The CE marking is only valid for the device in its delivery status. After modifying
the device, the CE conformity is to be verified.
Bosch Rexroth AG
Meaning
Vibration test
Shock test
Loss of CE conformity due to modifications of
the device.
25/69
Technical Data
Edition
September
2007
March 2006