Table of Contents
Advertisement
32/69
Bosch Rexroth AG
Dimensions and Installation
5.3
Installation
5.3.1
Installation Notes
5.3.2
Mounting Cut-out
Rexroth IndraControl VDP 16.1/40.1/60.1 Operator Display
Fig.5-15:
Dimensions: Y-repeater
●
The display is to be installed in such a way that an ergonomic operation
is ensured. Additionally, ensure that all machine components can be seen
by the operator!
●
Avoid installation locations exposed to direct UV light/sunlight, as the
screen readability is reduced and additional heat development can occur.
●
Provide a sufficient space of 50 mm on all sides of the device for cooling
and cable routing.
●
The LED displays on the front panel have to be visible.
●
Lay all connecting cables in loops and use strain reliefs for all cables.
●
Keep as much distance as possible to noise sources.
Mount the display as follows:
DOK-SUPPL*-VDP16/40/60-PR03-EN-P
Advertisement
Table of Contents
