Advertisement
RISK OF ELECTRICAL SHOCK: Turn power OFF before inspection, installation or removal.
RISQUE DE CHOC ELECTRIQUE: Coupez l'alimentation avant l'inspection, l'installation ou la désinstallation.
Driver Output
Electrical Connections
Male
Light module
5
Connect light module to driver output
Mate male connector from module with female
connector from DC output of driver.
Secure blue lock nut by turning counterclockwise
until tight ensuring water tight seal and good
connection.
Connection Schematic
Use proper circuit
protection level
AC line
Driver Input Wire
Colors
Black = Line 1
White = Neutral or Line 2
Yellow/Green = Ground
WARNING /
AVERTISSEMENT
Ambient temperature surrounding each
driver must be lower than 113°F (45°C).
/ La température ambiante autour de
chaque module d'alimentation ne doit pas
excéder 113°F (45°C).
WARNING / AVERTISSMENT
Female
Driver
Secure locknut
Optional 3', 6' or 12' inter-connection cable
NOTE: Maximum cumulative length of inter-connection cable is 12 feet.
Driver Input
Electrical Connections
6
Connect driver input to AC line
Connect the green wire to the incoming ground
conductor. Connect the black wire to Line 1 and
white wires to Neutral or Line 2 of the incoming
AC line.
3-Phase Y
*
*
*
N
L3
L2
L1
Driver
Driver
Driver
REPEAT FOR ENTIRE CIRCUIT BALANCING OUT EACH PHASE
*White = Neutral or Line 2
5
AC line
To driver input
3-Phase ∆
Driver
Driver Driver
Light engine
Advertisement
