Gateway: Setting The Lan Ip Address - Siemens S7 Series Communication Instruction Manual

4 Configuration and Project Engineering
4.2

Gateway: Setting the LAN IP address

Table 4-2: Setting the IP address of the gateway
No.
1. Make sure that

your computer is in the same subnet as all
the components involved,

all the components are connected using
LAN cables,

all the components are connected to a
power supply and turned on.
2. Start your preferred web browser and connect
to the gateway web server.
Select "General > IP-Network" to set the IP
3.
address of the gateway's LAN interface.
4. 1. Change the IP address.
Select "Save" to save the setting.
2.
Note
After saving, you need to reconnect to the
gateway using the new IP address you have
just set.
Note
For successful communication with the
gateway, the IP address of your PC must be in
the same subnet. If necessary, change the IP
address of your PC.
Communication with S7 CPU via KNX Gateway
Entry ID: 109739689, V1.0,
Action
06/2017
Comment
See Chapter 5.2 Installing the hardware
Factory default:
IP address: 169.254.0.1
User name: gw
Password: GATEWAY
16