Instruction; Precautions - Philips ADD4954 User Manual

Cooling switch
At the back of the dispenser there is a black switch which controls the heating power.
You may press it to switch between high power, low power and OFF.
Every time when you plug in the water dispenser again, it will need some time for getting hot
and cold water.
Turn the black heating switch to 'I', please wait for around 30 minutes for hot water;
Turn the black heating switch to 'II', please wait for around 15 minutes for hot water;
Turn the green cooling switch to 'ON', please wait for around an hour for cold water.

3 Instruction

· Unpack the water dispenser. Place the dispenser indoors, on a at surface and at a distance
no less than 15 cm from the back wall.
· Insert the bottle vertically on the seat
· Press the red hot water faucet until water ows out.
· Insert the power plug to the wall socket.
· Turn on the power switch on the back of the unit. The cooling or heating feature will start
running. The indicator light will be on when heating or cooling function is working. Do not
touch both switches during the time.
· Enjoy the hot or cold water you need.
· If you are not going to use hot water, turn the black heating switch to 'O'; if you are not going
to use cold water, turn the green cooling switch to "OFF" to conserve energy.

4 Precautions

· The drain plug on the back of the unit may become loose during shipping. Fasten the drain
plug tightly before you start to operate the unit. If the drain plug is loose, the unit may leak
and cause oor damage.
3
Power switch
Low power heating
O
High power heating