Connections - Sanyo FXC-503LD Operating Instructions Manual

ELECTRICAL CONNECTIONS
WIRING
Caution
DO NOT connect any speaker wires to the metal body or chassis of the vehicle.
l
. DO NOT connect the speaker common (-) wires to each other.
Connect each speaker wire directly to each speaker terminal.
l
Ail speaker common (-) wires must remain floating.
l
insert the antenna plug installed in your vehicle into this socket.
l
Connect this wire to the +12V power terminal which receives power continuously.
l
Connectthiswireto theterminal which receivespowerwhiiethe ignitionswitchisON
l
RY position.
in the case of avehicie not having ACC, connect thiswire to a +12V power terminal which receives power
l
continuously. (Same as terminal 2.)
Connect this wire to the vehicle chassis.
l
Connect this wire to the control terminal of a Power Antenna or an external amplifier.
l
When not using a Power Antenna or an external amplifier, this wire is not connected.
l
Antenna Plug
tern - --
Accessory/Switched
Ground wire (Black)
Power Antenna/Amplifier Turn On (Blue/Red)
power supply (Yellow)
(Red)