Copyright - Silvercrest SSMS 600 A1 Operating Instructions And Safety Instructions

cable in such a way that nobody can stand or trip on it. There is a
risk of injury!
 The device must always be disconnected from the mains if left
unattended, in the event of malfunctions, prior to assembly and
disassembly or cleaning. There is a risk of electric shock!
Under no circumstances may the motor block (4) be
immersed in water and no liquids must ingress into the
housing of the motor block (4).
 Should liquids ingress into the housing of the motor block (4),
immediately remove the plug from the power socket and contact
the service department (see "Warranty information" section).
There is a risk of electric shock!
 Never touch the motor block (4), the power cable and the plug
with wet hands. There is a risk of electric shock!
 Disconnect the hand-held blender from the mains as soon as it has
been used. The device is only de-energised once the plug has
been removed. There is a risk of electric shock!
DANGER of fire
Following the maximum period of use of up to 1 minute with the
immersion blender (5) or 2 minutes with the whisk (6), let the hand-
held blender cool down for at least 2 minutes and only then continue
with the process previously started. There is a risk of fire.

5. Copyright

All contents of these operating instructions are subject to copyright law and are provided to the user solely
as a source of information. Any form of copying or reproduction of data and information without the
express written permission of the author is prohibited. This also concerns commercial use of the content and
data. The text and illustrations correspond to the technical standards at the time of printing. Subject to
alterations.
SilverCrest SSSH 600 A1
English - 9