NEC SV9100 Quick Reference Manual page 2

To activate Do Not Disturb:
1. Press the "Prog" softkey
2. Press the "DND" softkey
3. Press the "Set" softkey
4. Press "Ext" for outside calls, "Icm" for internal calls or "ALL" for both outside and internal
To cancel Do Not Disturb:
1. Press the "Prog" softkey
2. Press the "DND" softkey
3. Press the "Cncl" softkey
To program an outside telephone number into a spare key on your handset:
1. Press SPEAKER
2. Dial 751
3. Press the key you wish to program
4. Dial 01
5. Dial 0 then the telephone number you want to store
6. Press HOLD
7. Go back to step 3 if you want to program another key
OR
8. Press SPEAKER to finish
To set an automatic call back (Camp on) on a busy internal call:
1. Call an internal extension and hear the busy tone
2. Dial #
3. Hangup - When the busy party finishes their call, their extension will call you back
To hear your music on hold through your handset (same to turn on or off):
1. Press SPEAKER
2. Dial 725
3. Press SPEAKER
[This needs to be enabled & programmed before it can be used – give us a call if the code doesn't work]
To set the volume of your speaker, handpiece or ringer:
Hands-free Speaker Volume: Press the top or bottom of the round cursor button while you're on a hands-free call
Handpiece Volume: Press the top or bottom of the round cursor button while you're on a normal call using the
handpiece
Ringer Volume: Press the top or bottom of the round cursor button while you're phone is ringing (this will set the
volume for both the internal and external ring tones)
Phone: 02 49830066 Email:
Fax: 02 49830077 Head Office: PO Box 269 Hunter Region MC NSW 2304 ABN 64 089 273 852 ACN: 089 273 852
admin@advcom.com.au Website: www.advancedcommunications.com.au