Download Print this page
Sealey AP2020 Instructions

Sealey AP2020 Instructions

Heavy-duty workbench with 2 drawers

Advertisement

Quick Links

Thank you for purchasing a Sealey product. Manufactured to a high standard this product will, if used according to these instructions and
properly maintained, give you years of trouble free performance.
IMPORTANT: PLEASE READ THESE INSTRUCTIONS CAREFULLY. NOTE THE SAFE OPERATIONAL REQUIREMENTS, WARNINGS & CAUTIONS.
USE THE PRODUCT CORRECTLY AND WITH CARE FOR THE PURPOSE FOR WHICH IT IS INTENDED. FAILURE TO DO SO MAY CAUSE
DAMAGE OR PERSONAL INJURY, AND WILL INVALIDATE THE WARRANTY. PLEASE KEEP INSTRUCTIONS SAFE FOR FUTURE USE.
1.
SAFETY INSTRUCTIONS
1.1
GENERAL SAFETY
WARNING! Ensure Health & Safety, local authority, and general workshop practice
p
regulations are adhered to when using this bench.
Locate bench in a suitable working area.
3
Keep the work area clean, uncluttered and ensure there is adequate lighting.
3
WARNING! Use bench on level and solid ground, preferably concrete. Avoid tarmacadam
p
since the bench may sink into the surface.
Keep the bench clean and tidy in accordance with good workshop practice.
3
Keep children and unauthorised persons away from the working area.
3
DO NOT use the bench for any purpose other than that for which it is designed.
7
DO NOT undertake work on the bench without the workpiece being adequately secured. Use
7
clamps or a vice (not included) to secure the workpiece. Available from your Sealey dealer.
DO NOT use the bench out of doors.
7
DO NOT get the bench wet or use in damp or wet locations or areas where there is
7
condensation.
DO NOT clean the bench with any solvents which may damage the paint surface or the
7
protective coating on the wooden top.
Maximum weight for each drawer is 25 kg, full load for Workbench is 250 kg
p
2.
CONTENTS
2.1
Carefully unpack the product and check the contents against the diagram below. Should any items be missing or damaged make
immediate contact with your Sealey dealer.
Sole UK Distributor
Sealey Group,
Bury St. Edmunds, Suffolk.
HEAVY-DUTY WORKBENCH WITH 2 DRAWERS
01284 757500
01284 703534
INSTRUCTIONS FOR:
AP2020
:
MODEL
www.sealey.co.uk
Web
sales@sealey.co.uk
email
AP2020 - 1 - 061005

Advertisement

loading

Summary of Contents for Sealey AP2020

  • Page 1 AP2020 MODEL Thank you for purchasing a Sealey product. Manufactured to a high standard this product will, if used according to these instructions and properly maintained, give you years of trouble free performance. IMPORTANT: PLEASE READ THESE INSTRUCTIONS CAREFULLY. NOTE THE SAFE OPERATIONAL REQUIREMENTS, WARNINGS & CAUTIONS.
  • Page 2 8 bolts (O), 8 lock and the cabinet. Repeat procedure with the nuts (Q). washers(P), and 8 nuts (Q). other back panel and 2 draw stops. Use 8 bolts (O), 8 lock washers (P), and 8 nuts (Q). AP2020 - 1 - 061005...
  • Page 3 Keep the rear face of the slide up against the draw or slide panel. On the then open the draw to check that it is retained. draws pull the slide sharply upwards to engage it. On the cabinet push the slides down to engage. AP2020 - 1 - 061005...