Sealey AP20FWB Instructions

Thank you for purchasing a Sealey product . Manufactured to a high standard, this product will, if used according to these
instructions, and properly maintained, give you years of trouble free performance .
IMPORTANT: PLEASE READ THESE INSTRUCTIONS CAREFULLY . NOTE THE SAFE OPERATIONAL REQUIREMENTS, WARNINGS & CAUTIONS . USE THE PRODUCT
CORRECTLY AND WITH CARE FOR THE PURPOSE FOR WHICH IT IS INTENDED . FAILURE TO DO SO MAY CAUSE DAMAGE AND/OR PERSONAL INJURY AND WILL
INVALIDATE THE WARRANTY . KEEP THESE INSTRUCTIONS SAFE FOR FUTURE USE .
1 . SAFETY
Select a work area suitable for the workbench and keep the area clean, tidy and free from unrelated materials. Ensure there is adequate
3
lighting.
Mount the workbench on a stable wall and floor strong enough to take the weight of the workbench and cabinet.
3
Maintain the workbench in good condition.
3
Replace or repair damaged parts. Use recommended parts only, unauthorised parts may be dangerous and will invalidate the warranty.
3
Remove ill fitting clothing, remove ties, watches, rings and other loose jewellery and contain long hair.
3
Maintain correct balance and footing. Ensure the floor is not slippery and wear non-slip shoes.
3
Keep children and unauthorised persons away from the work area.
3
2 . INTRODUCTION
Space saving wall mounting folding workbench with peg board and wall mounted cabinet. Workbench provides large work area when needed
and conveniently folds away when not in use, saving space in garage/workshop. Storage provided by wall cabinet and peg board back for hand
tools. Wall cabinet has 3 locking sections, each provided with 2 keys.
3 . SPECIFICATION
Model No: . . . . . . . . . . . . . . . . . . . . . . . . . . AP20FWB
Dimensions (WxDxH):
Cabinet: . . . . . . . . . . . . . . . . . . . . . . 1200x200x600mm
Cabinet Sections (x3): . . . . . . . . . . . . 385x170x590mm
Peg Board (WxH): . . . . . . . . . . . . . . . . . . 1200x585mm
Workbench Folded: . . . . . . . . . . . . . . 1200x70x870mm
Workbench Open:. . . . . . . . . . . . . . . 1200x650x870mm
Wall Area Required: . . . . . . . . . . . . . . . . 1200x2055mm
4 . ASSEMBLY
4.1. Wall Mounted Cabinet
4.1.1. Use Wall Mounted Cabinet Parts Diagram to
identify the parts and follow diagrams to assemble,
see fig's 1 to 8.
4 .2 . Work Bench
4.2.1. Use the Work Bench Parts Diagram to identify the
parts and follow diagrams to assemble, see fig's 9
to 12.
Wall Mounted Cabinet
Exploded View
© Jack Sealey Limited
INSTRUCTIONS FOR:
FOLDABLE WORKBENCH, CABINET AND
PEG BOARD
AP20FWB
MODEL NO:
Work Bench
Exploded View
Original Language Version
AP20FWB Issue: 2(I) - 05/12/14