Installing The Guard - Toro 51480A Operator's Manual

2

Installing the Guard

Parts needed for this procedure:
1 Guard
1 Phillips screw
Procedure
1. Slide the guard onto the trimmer base as shown in
1. Phillips screw
2. Secure the guard using the Phillips screw.
Figure 2
2. Guard
3
Installing the Edge Guard
Parts needed for this procedure:
1 Edge guard
Procedure
Insert the ends of the edge guard into the holes in the trimmer
housing as shown in
Figure 2.
g015656
1. Edge guard
5
Figure 3.
Figure 3
g017621