Installing The New Thermostat Head - Silvercrest RT2000 Operating Manual

2�
Unscrew the fixing element (10) of the thermostat head
and remove the thermostat head�

Installing the New Thermostat Head

To fit the device to Danfoss radiator valves, you need one
of the adapters provided. To determine which adapter (14)
fits which radiator valve, please refer to Fig. 2-4 on the fold-
out page�
Caution! During assembly, be careful
not to jam your fingers between the
halves of the adapter!
Caution! The adapters supplied are
joined together with plastic tabs. Edges
which have been snapped off can be
sharp. Break out the plastic tabs carefully
and smoothen the sharp edges on the
adapter you use with a suitable tool.
The notches (13) on the circumference ensure the adapter
fits perfectly.
1�
If required, slip the adapter (14) that fits the radiator
valve onto the valve until the adapter snaps into place.
38
G