Changing The Oven Light; Cooking Table - Kenmore 790.4907 Series Use & Care Manual

Genera Care & C eaning
Lift backsidE.
of glass shield
and remove it.
Hatogen
Light Bulb
Changing the Oven Light
An interior oven ]ight wiU]turn on automaticaUUy when the oven door is opened,
The oven ]ight may be turned on when the door is cUosed by using the oven
]ight switch located on the control panel,
The lamp is covered with a glass shield, The glass shield can be removed to be
cleaned manually or to change oven light, THIS GLASS SHIELD MUST BE IN
PLACE WHENEVER THE OVEN IS IN USE,
To replace the light bulb:
CAUTION: BE SURE THE OVEN IS COOL.
1, Turn the power off at the main source,
2, Wear a bather-faced glove for protection against possible broken glass,
3, To remove the glass shield, pull the back side of the shield toward the
inside of the oven in a manner to lift it up from the oven side,
4, The glass shield should come out easily by pushing a little toward front of
the range,
5, Replace halogen light appliance bulb taking care not to touch the bulb with
your bare fingers, Touching bulb with your skin can leave a film on the bulb
that causes it to burn out quickly,
6, Replace glass shield in opposite order and manner of removal,
Cooking Table
CONVECTION BAKE pad
Food Type Decrease in normaJ
cook time
Frozen foods, pies,
pastries and pizza
Rolls & Breads
Fresh Pies/Pastries
15-25%
15-35%
15-30 %
20-25%
10-20%
Begin with the maximum reduction in cook time
and adjust as needed,
*Recommended reduction in cook time based on
brands of food items tested, Cook time may vary
with your specific brand of food item,
31