Advertisement
You can adjust the picture when "Input select" is selected
to "PC". (p, 29)
PFoce([l_gFe
1. Press
A V to select
"PC adjust".
2. Press OK to display
the PC adjust
menu.
Other detailed picture adjustments can be made.
This function is not available when "Input select" is
selected to "PC", (p, 29)
Procedure
1. Press
A V to select
"Other
adjust".
2. Press
OK to display
the Other
adjust
menu.
3. Press
A T to select each
item.
4. Press
4 _, to adjust
each item.
3. Press
A T to select
each item.
4. Press
4 I_ to adjust
each
item.
item
'
Explanations
Resets all picture adjustments
to factory default
Normal
settings.
• H&V : The H and V sync signals are input from
the HD/VD connector.
Sync
• On G : Uses a synchronized
signal on the Video
G signal, which is input from the G connector.
Dot clock
Adjusts
horizontal
size.
H-Position
Adjusts
horizontal
position.
V-Position
Adjusts vertical
position
Adjusts
in order to remove
any picture
Clock phase
interference
or contour
blurring
which may occur
tn computer
images.
Input
Switches
to wide display.
resolution
Input signal switched
from XGA to WXGA and
from VGA to WVGA.
Displays
the frequencies
of the PC signal
currently
being adjusted.
H-Frequency/
Displays
the H (Horizontal)
/V (Vertical)
V-Frequency
frequencies.
Display range:
Horizontal
15-110 kHz
Vertical
48 - 120 Hz
• This function
is available
only when
the signal
being viewed
is from a PC.
Item
i
Explanations
Reduces
noise, commonly
called snow. Leave off
Video NR
when receiving
a strong signal.
3D Y/C filter
Minimizes
noise and cross-color
in the picture.
Select SD or HD.
• SD : Color matrix is set same as a normal IV
system (NTSC).
• HD : Color matrix is set same as a
High-Definition
system (ATSC).
With a 480p signal from equipment
connected
to COMPONENT
VIDEO INPUT (Y, PB, PR) or
HDMI INPUT terminals
or from the unit's DTV
Color matrix
tuner, you can select SD or HD color matrix to
display the most natural color.
Block NR
Mosquito
NR
Black level
3:2 pulldown
• This feature is available
only with 480p signals.
• The default setting with HDTV signals (720p,
1080i or 1080p) is HD color matrix.
• The default setting with NTSC signals (480i) is
SD color matrix.
Reduces
noise of specific
digital signals of DVD,
STB, etc.
Reduces
HDTV flicker noise in the contoured
sections of an image.
Select Light or Dark [Dark : VIDEO, Light :
480i/480p/72Op/1080i/1080p]
Invalid for Digital
channel,
Analog channel,
PC and Photo viewer.
Transfers
film to video.
37
Advertisement
