Advertisement
No signal
shut-off
No action
shut-off
To conserve
energy, this Projection
Display
automatically
turns off when NO SIGNAL
continues
more than 10 minutes.
• Not in use when setting "PC", "Photo viewer mode",
"Lock", or Digital channel.
• "No signal shut-off
was activated"
will be displayed
for about 10 seconds
when this Projection
Display is
turned on for the first time after turning the power off
by "No signal shut-off'.
• The on-screen
display will flash 3, 2 and 1 to
indicate the last three (3) remaining
minutes
prior to
the shut-off.
To conserve
energy, this Projection
Display
automatically
turns off when no operation
of remote or
front panel key continues
more than 3 hours.
• Not in use when setting "PC".
• "No action shut-off was activated"
will be displayed
for about 10 seconds
when this Projection
Display is
turned on for the first time after turning the power off
by "No action shut off'.
• The on-screen
display will flash 3, 2 and 1 to
indicate the last three (3) remaining
minutes
prior to
the shut-off.
Display the TV set Version and Software License.
Setup is reset.
PFocedblre
1. Press
A T to select
"Reset".
2. Press
OK to display
the password
screen.
3. Enter your
password
by pressing
the
NUMBER
keys to reset the Setup
settings.
4. The confirmation
screen
is displayed.
Select
"Yes",
and press
OK.
Yes
Proce([glre
1. Press
A T to select
"About".
2. Press OK to display
the About
screen.
3. Press
A T to select
"Version"
or "License".
4. Press OK to display
the Version
or License
screen.
• Performing
Reset
will clear all items set with Setup,
such as
channel
settings.
Use Reset
with care.
• POWER
indicator
flashes
red. After flashing
stops,
unplug
the
unit then plug it back in and turn power
ON.
• When
using "EZ Sync TM "HDAVI
Control
TM'''', with the device
connected,
set "EZ Sync"
first to "Off" and then "On" using the
Setup Menu.
(p. 52-53)
55
Advertisement
