Page 1
Part No. 99–0281 INSTRUCTIONS Loose Parts Note: Use the chart below to identify parts for assembly. DESCRIPTION QTY. Spacer Replace spacer (as required) Shear Bolt Install new shear bolt Lock Nut The Toro Company – 1998 All Rights Reserved Printed in USA...
Page 2
Installation Instructions Checking blade movement Disengage the power take off (PTO), set the parking brake, and turn the ignition key to “OFF” to stop the engine. Remove the key. Flip up deck and lock into vertical position. Remove shear bolts (Fig.1). Note: Do not remove blade bolt when checking blade movement.