Interfaces - Siemens SIMATIC NET System Manual

Slot for SIM card
C-PLUG slot
● Suitable / available or according to the specified standard
A redundant power supply is possible through parallel connection to multiple energy suppliers: Combination of external
1)
power supply/battery modules/battery
Functions
All devices have the following functions:
● Web Based Management
● Configuration of the IP address with DHCP
● Communication with the master station with TeleControl Basic, SINAUT ST7, DNP3, IEC
60870-5-104
● NTP
● SNTP
● DHCP client
● OpenVPN
6.4

Interfaces

Device
Voltage supply via 5-pin plug-in
terminal strip
Digital inputs (DI) / of which
counter inputs
Digital outputs (DO)
Digital outputs (AI)
Analog inputs
Ethernet interface 10/100 Mbps
for connection to external router
Antenna connection mobile wire-
less
Antenna connector GPS
Connection for battery modules
The LAN connector is not suitable for direct connection of the RTU to the Internet. To do this, an external router with
1)
suitable security mechanisms must be connected.
Industrial Ethernet
System Manual, 09/2019, C79000-G8976-C242-10
RTU3010C RTU3030C
-
-
RTU3010C RTU3030C
1
8 / 2
4
4
-
1x RJ45
1)
-
-
Max. 2x 3
RTU3031C
●
-
RTU3031C
1
8 / 2
4
4
-
1x RJ45 1x RJ45
1)
1x SMA socket 1x SMA socket
- 1x SMA socket
Max. 2x 3
TeleControl
6.4 Interfaces
RTU3041C
●
-
RTU3041C
1
8 / 2 8 / 2
8
4
2
1x RJ45
1)
1x SMA socket
1x SMA socket
Max. 2x 3 Max. 2x 3
●
-
1
8
4
2
1)
295