Table of Contents
Advertisement
Using the Alerts Function
If a problem, confilict or error occurs with one of the essential
Intelli-Sense functions, an Alert prompt will be immediately posted.
Selecting Alerts function provides a quick overview of the monitored
functions, and flags the source of the alert condition.
1.
Turn the Function dial to the ALERT position.
FL VL CM WD DY HW SB
-- ER -- -- —— —— ––
——=Ok ER=Error
From the initial Alert display screen, the specific function causing
the alert condition will be identified as follows:
FL - Flow Status
VL - Valve Status
CM - Communication Status
WD - Water Window Status
2.
Turn the Upper Line knob to select the function to review.
The current status will be displayed, and if additional data is
available, a Skip/View option will be provided.
3.
To view the additional data, turn the Lower Line knob to select
View. Turn the Upper Line knob to display the data.
Note: When the condition has been resolved, the Alert display
prompt will be removed.
Example: Valve Status Alert
1.
With the ALERTS function selected, turn the Upper Line knob
right to select View Valve Status.
VIEW VALVE STATUS
Skip Short
2.
Turn the Lower Line knob to select View.
3.
Turn the Upper Line knob right as needed to display the affected
station number(s).
01 02 03 04 05 06 07 08
-- -- SH -- —— —— —— ––
SH=Short
46
DY - Water Day Status
HW - Hardware Status
SB - Subscription (ET) Status
NC=NoConnect
Advertisement
Table of Contents
