1 PREPARATION
Saving energy when not in use - Energy saving mode -
To reduce power consumption, the equipment automatically enters into the energy saving mode
when a specified period of time has passed since its last use. You can also turn the equipment
into this mode manually.
The period of time at which the equipment enters into this mode is set at 30 minutes at the
shipment from the factory.
The power consumption during this mode is set at 70 W or less. (When the equipment is
connected to a PC with a USB cable, the power consumption during this mode is set at 23 W
or less.)
To turn the equipment into the energy saving mode manually
Press the [ENERGY SAVER] button on the control panel.
The equipment is now in the energy saving mode. The [ENERGY SAVER] lamp is lit.
Cancelling the energy saving mode
Press the [ENERGY SAVER] button. The energy saving mode is canceled.
The energy saving mode can be cancelled also in the following cases:
When the Platen Cover or the Automatic Document Feeder (optional) is raised
When this equipment and a PC are connected with a USB cable
30
Preparation 1 - Turning Power ON