Table of Contents
Advertisement
Preparation (continued)
■ Case 2
z PT-RQ13K / PT-RZ12K / PT-RS11K
z PT-DZ21K2 / PT-DS20K2 / PT-DW17K2 / PT-DZ16K2
z PT-DZ13K / PT-DS12K / PT-DW11K / PT-DZ10K
MAIN MENU
PICTURE
POSITION
ADVANCED MENU
DISPLAY LANGUAGE
3D SETTINGS
DISPLAY OPTION
PROJECTOR SETUP
P IN P
TEST PATTERN
SIGNAL LIST
SECURITY
NETWORK
MENU SELECT
SUB MENU
ENTER
PROJECTOR SETUP
INITIAL STARTUP
STARTUP INPUT SELECT
DATE AND TIME
TIME ZONE
RS-232C
REMOTE2 MODE
FUNCTION BUTTON
LENS CALIBRATION
LENS MEMORY
STATUS
AC VOLTAGE MONITOR
SAVE ALL USER DATA
MENU SELECT
CHANGE
EXECUTE
ENTER
LENS CALIBRATION
Proceed LENS CALIBRATION,
and return to HOME POSITION.
OK
CHANGE
EXECUTE
ENTER
Note
z If ET-D3LEU100 is used on the PT-DZ21K2 / PT-DZ16K2, part of the image will be
obscured when in the home position. Adjust the lens shift within the lens shift range as
described on page 12.
2/3
LAST MEMORY
LAST USED
OFF
DEFAULT
NORMAL
OFF
CANCEL
1)
Press the <MENU> button.
2)
Use the ▲ and ▼ buttons to
select [PROJECTOR SETUP],
and press the <ENTER>
button.
z The [PROJECTOR SETUP] screen
appears.
3)
Use the ▲ and ▼ buttons to
select [LENS CALIBRATION].
4)
Use the
and
select [NORMAL], and press
the <ENTER> button.
z The confirmation screen appears.
5)
Use the
and
select [OK], and press the
<ENTER> button.
z Lens calibration starts.
z The projection lens moves to the
home position after adjustment range
calibration is complete.
buttons to
buttons to
ENGLISH-9
Advertisement
Table of Contents
