Toshiba D-R1SU Owner's Manual page 44

Recording
Programming a recording (REC MENU) (Continued)
Remaining volume
1) Press the REC MENU button.
The REC MENU appears.
2) Press the QUICK MENU button.
The Quick Menu appears.
3) Press the /
Calculation" then press the ENTER button.
The Disc Budget Calculation menu appears.
4) Press the /
program, then press the ENTER button or press
the ADJUST button.
The recorder calculates on a bar graph how much
a specific program (identified by a check mark) will
occupy on the disc.
Pressing the ADJUST button can display or remove
the check mark.
e.g.
REC
Disc Budget Calculation
MENU
CH Date
3 7/8(Tue) 11:30
10 7/9(Wed) 21:30
42 7/11(Fri) 22:30
4 7/12(Sat) 20:30
Elapsed
HDD DVD
Select Return
Selected entry
When the entry item is marked X, the
recording does not end. Change the setting.
5) Correct the parameters of the timer program if
necessary.
(Skip to step 7 if you do not need this.)
You can change "Mode", "Rate", and "Audio".
Select an item you want to modify and press the
ENTER button. The item will be ready to be altered.
Press the ADJUST button to modify. When
complete, press the ENTER button.
6) Press the button.
Program modification is registered.
7) Press the REC MENU button to exit the GUI.
44
buttons to select "Disc Budget
buttons to select a timer
7/8 (Tu)
Start End Media Mode Rate Audio
M N 6. 0
– 11:50 DVD
D/M2
22:00 M N 6. 0
– DVD D/M2
–
23:30 DVD L P 2. 2
D/M1
–
23:30 4. 4
DVD S P D/M2
( ) Selected(current) Available
DVD
REC-MENU REC-MENU REC-MENU
Adjust Revise List
Available disc volume
Notes
• When a Reservation disc is inserted in the recorder
( page 48), you cannot check the remaining volume of
other discs.
• The nearest 8 programs are calculated at a time.
• While the recorder is preparing for or executing a
programmed recording, any program modification cannot
be registered.
• Available disc volume is not displayed for a DVD-R/RW
disc on which DVD-Video finalize process was executed.
To stop a programmed recording
To finish,
Press the
When you press it once, a message appears. While
the message is displayed, press the
again.
To pause recording,
21:00
Press the
Result
To resume recording, press it again.
Turning the power off automatically after
completing a programmed recording
1) While executing a programmed recording,
End
press the QUICK MENU button.
The Quick Menu appears.
2) Press the
Off" then press the ENTER button.
Keeping the power on even after the
programmed recording finished
If the recorder turns itself on to execute a programmed
recording, it will turn itself off after finishing the
recording. You can restrict this and keep the recorder
powered on.
1) While executing a programmed recording,
press the QUICK MENU button.
2) Press the
Power On" then press the ENTER button.
button on the front panel twice.
button on the front panel.
/ buttons to select "Auto Power
/ buttons to select "Continue
button once