Toshiba D-R1SU Owner's Manual page 45

Delaying the end time of a programmed
recording while executing it
While executing a programmed recording, open
the lid of the remote control and press the
EXTEND button.
The first press displays the programmed end time (in
the front panel display).
Each time you press the button, it is delayed 10
minutes, up to 60 minutes.
Notes
• Pressing a button except EXTEND in the above procedure
will set the currently selected delay.
• You cannot delay the end time of a programmed recording
which will end within 1 minute from the current time.
• Even if you delay the end time of a programmed recording,
the recording will stop when the disc is exhausted.
45