Changing the on-screen display language
Choose from three different languages (English, French and Spanish) for
he on-screen display of adjustment menus and messages.
To select a language:
1. Press MENU, and then press x or • to display the FEATURE
menu appears.
2. Press y or z to highlight LANGUAGE.
FEATURE
ENGLISH
LANGUAGE
AUTO POWER
OFF
INVERT
OFF
CAPTION
V-CHIP
3. Press x or • to select your desired language.
Programming channels into the TV's memory
When you press CHANNEL y z on the TV or remote control, the TV
stops only on the channels stored in the TV's memory.
Note: To tune the TV to a channel not programmed into the channel memory, use
the CHANNEL NUMBERS on the remote control.
Follow the steps below and on the next page to program channels into
the TV's memory.
Programming channels automatically
Your TV can automatically detect all active channels in your area and
store them in the TV's memory. After the channels are stored
automatically, you can manually add or erase individual channels (see
page 15).
To program channels automatically:
1. Press MENU, and then press x or • to display the SET UP menu.
2. Press y or z to highlight TV/CABLE .
3. Press x or • to select TV(if you use an antenna) or CABLE (if you
use Cable).
4. Press z to highlight SYSTEM.
5. Press x or • to select the correct color system.
AUTO, NTSC- M, PAL- M and PAL- N will appear cyclically.
Normally select AUTO.
This selection is necessary only when the color of a certain channel
is abnormal.
SET UP
TV/CABLE
TV
SYSTEM
AUTO
CH PROGRAM
EDIT
CH POSITION
12
ADD/ERASE
ADD
FAV. CH
CLEAR
6. Press z to highlight CH PROGRAM.
[Continued on the next page]
14
SET UP
TV/CABLE
TV
SYSTEM
AUTO
CH PROGRAM
EDIT
CH POSITION
12
ADD/ERASE
ADD
FAV. CH
CLEAR
MENU
MENU
yzx •
CHANNEL
NUMBERS
CHANNEL
yz
yzx •