Adjusting the audio
Turning off the built-in speakers
Use this feature to turn off the TV speakers when you connect
an audio system to your TV (see "Connecting a digital audio
system" and "Connecting an analog audio system" on page 24).
To turn off the built-in speakers:
1. Press MENU and open the Audio menu.
2. Highlight Audio Setup and press ENTER.
Audio
Audio Settings
Advanced Audio Settings
Audio Setup
3. In the Speakers field, select Off.
Audio Setup
MTS
Language
Speakers
Optical Output Format
Reset
4. To save the new settings, highlight Done and press
ENTER. To revert to the factory defaults, highlight Reset
and press ENTER.
To turn on the built-in speakers:
Select On in step 3 above.
#01E_084-093_4250HPX95
93
Black
(E) 42/50HPX95 *web 213:276
Chapter 8: Using the TV's features
(continued)
Stereo
English
On
Dolby Digital
Done
Copyright © 2005 TOSHIBA CORPORATION. All rights reserved.
Selecting the optical audio output
format
Use this feature to select the optical audio output format when
you connect a Dolby Digital decoder or other digital audio
system to the Optical Audio Out terminal on the TV (see
"Connecting a digital audio system" on page 24).
To select the optical audio output format:
1. Press MENU and open the Audio menu.
2. Highlight Audio Setup and press ENTER.
Audio
Audio Settings
Advanced Audio Settings
Audio Setup
3. In the Optical Output Format field, select either Dolby
Digital or PCM, depending on your device.
Audio Setup
MTS
Stereo
Language
English
Speakers
On
Optical Output Format
Dolby Digital
Reset
Done
4. To save the new settings, highlight Done and press
ENTER. To revert to the factory defaults, highlight Reset
and press ENTER.
05.9.12, 10:21 PM
93