LG 32LM63 Series Owner's Manual page 3

• Ventilation
- Install your TV where there is proper
ventilation. Do not install in a confined
space such as a bookcase.
- Do not install the product on a carpet or
cushion.
- Do not block or cover the product with
cloth or other materials while unit is
plugged in.
• Take care not to touch the ventilation
openings. When watching the TV for a
long period, the ventilation openings may
become hot.
• Protect the power cord from physical or
mechanical abuse, such as being twisted,
kinked, pinched, closed in a door, or walked
upon. Pay particular attention to plugs, wall
outlets, and the point where the cord exits
the device.
• Do not move the TV whilst the Power cord is
plugged in.
• Do not use a damaged or loosely fitting
power cord.
• Be sure do grasp the plug when unplugging
the power cord. Do not pull on the power
cord to unplug the TV.
• Do not connect too many devices to the
same AC power outlet as this could result in
fire or electric shock.
• Disconnecting the Device from the
Main Power
- The power plug is the disconnecting
device. In case of an emergency, the power
plug must remain readily accessible.
• Do not let your children climb or cling onto
the TV. Otherwise, the TV may fall over,
which may cause serious injury.
• Outdoor Antenna Grounding (Can differ
by country):
- If an outdoor antenna is installed, follow
the precautions below. An outdoor
antenna system should not be located in
the vicinity of overhead power lines or
other electric light or power circuits, or
where it can come in contact with such
power lines or circuits as death or serious
injury can occur.
Be sure the antenna system is grounded to
provide some protection against voltage
surges and built-up static charges.
Section 810 of the National Electrical Code
(NEC) in the U.S.A. provides information
with respect to proper grounding of the
mast and supporting structure, grounding
of the lead-in wire to an antenna discharge
unit, size of grounding conductors, location
of antenna discharge unit, connection to
grounding electrodes and requirements for
the grounding electrode.
Antenna grounding according to the
National Electrical Code, ANSI/NFPA 70
3