Trigger setup
Settings menu
Source setup
Speaker setup
Trigger setup
Listening Mode setup
Video setup
Language setup
The High Defi nition A/V Receiver features a
confi gurable +12V DC Trigger Output that can
be used to activate a device or system it is fed
into.
[Trigger out]
Triggers are low voltage signals used to turn on/
off other compliant devices. There are two
choices where +12V DC output can be assigned
and these are – Main and Source Setup.
[Main]
•
– +12V DC is available at the
assigned Trigger Out when the High
Defi nition A/V Receiver is at powered state.
[Source setup]
•
– If Trigger Output is linked
to "Source setup", +12V DC is available at
Trigger Out whenever the particularly
assigned Source is selected.
[Delay]
The availability of +12V DC at Trigger OUT
can be regulated. If it is desired that +12V DC
is available without delay the moment Trigger
OUT is linked to its assigned setting, set Delay
to 0s. Otherwise, one can select through a
delay time of 1s to 15s.
EN
32
Trigger out
: Main
Delay
: 0s
Listening Mode setup
Settings menu
Source setup
Speaker setup
Trigger setup
Listening Mode setup
Video setup
Language setup
Please refer to 'Setup'> 'Setting up listening
modes'> 'Listening Mode Setup' for more
information.
Adjust listening modes
The High Defi nition A/V Receiver's listening
modes have several variations and parametres
that you can modify to suit your personal
preferences. Use a combination of B and vV
buttons to confi gure the following settings.
On the Main Menu, use vV buttons to
navigate through the menu and select
[Listening mode], and then press B.
Listening mode
Audio synchs
Tone controls
Settings menu
[Listening Mode]
The following options can be selected from
[Listening Mode] under [Mode] option. (This
option is for a two-channel input only.)
[Stereo]
•
[PLIIx Music]
•
•
[PLIIx Movie]
Listening Mode
Dolby Setup
DTS Setup
Mode
: PLIIx Music
Center Width : 3
Dimensions
: 0
Panorama
: Off