Advertisement
warning! ensure the grinder is unplugged from the mains power supply before performing any maintenance or service.
‰
7.3.1.
As the grinding stone wears, adjust the position of the tool rests. The rest must be set at a maximum of 2mm from the stone surface.
7.3.2.
Remove the grinding stone cover regularly and clean out any dust and dirt.
7.3.3.
The machine motor and bearing are sealed units and require no regular maintenance. Should you require assistance, contact your
local Sealey service agent.
7.3.4.
For information relating to the handling and maintenance of grinding stones refer to section 5.
7.1.
belt changing
7.1.1.
To change belt: remove belt guard by slackening securing screw (fig.3) and sliding guard down over screw head.
7.1.2.
Slacken idle pulley screw (fig.1) and press down against spring pressure (fig.4) so releasing belt.
7.1.3.
Remove belt from bottom pulley.
7.1.4.
Refitting is reverse of 7.1.1 and 7.1.2.
7.1.5.
Check that belt is running true as in 4.6.2
weee regulatiOns
Dispose of this product at the end of its working life in compliance with the EU Directive on Waste Electrical and Electronic Equipment
(WEEE). When the product is no longer required, it must be disposed of in an environmentally protective way. Contact your local solid
waste authority for recycling information.
envirOnment prOtectiOn
Recycle unwanted materials instead of disposing of them as waste. All tools, accessories and packaging should be sorted, taken to
a recycling centre and disposed of in a manner which is compatible with the environment. When the product becomes completely
unserviceable and requires disposal, drain any fluids (if applicable) into approved containers and dispose of the product and fluids
according to local regulations.
note: It is our policy to continually improve products and as such we reserve the right to alter data, specifications and component parts without prior
notice.
important: no liability is accepted for incorrect use of this product.
warranty: Guarantee is 12 months from purchase date, proof of which is required for any claim.
sealey group, Kempson way, suffolk business park, bury st edmunds, suffolk. ip32 7ar
01284 757500
© Jack Sealey limited
01284 703534
sales@sealey.co.uk
Original Language Version
www.sealey.co.uk
BG150BS | Issue:2 (H,F) 10/07/18
Advertisement
