Option 3: Connect audio through analog
audio cables
Basic quality audio
Using an analog cable, connect the AUX
connectors on your SoundBar to the audio
connectors on the device.
EN
10
6
This section helps you use the SoundBar to play
audio from connected devices.
Before you start
•
•
VCR
Play audio from TV or other
devices
Press the Source buttons to select the audio
output of the connected device.
Adjust the volume
To increase or decrease volume, press VOL +/-.
•
To mute sound, press MUTE.
•
To restore the sound, press MUTE again or press
VOL +/-.
Choose your sound
This section helps you choose the ideal sound for
your video or music.
Use your SoundBar
Make the necessary connections described in
the quick start guide and the user manual.
Switch the SoundBar to the correct source
for other devices.
The Source indicators on the front panel
blink thrice when the volume is set to either
minimum or maximum.
The current Source indicator on the front
panel blinks continuously.